Sad they won’t keep the KC Scout statue medallion from terminal B.
OFFICIAL - New KCI Terminal
- Anthony_Hugo98
- Penntower
- Posts: 2230
- Joined: Fri Mar 22, 2019 10:50 pm
- Location: Overland Park, KS
- Major KC Fan
- Strip mall
- Posts: 192
- Joined: Sat Jul 11, 2009 2:20 pm
Re: OFFICIAL - New KCI Terminal
Hoping they save all medallions as the old terminals are demo’d and use them in other city facilities.
- TheLastGentleman
- Hotel President
- Posts: 3027
- Joined: Tue Jun 13, 2017 9:27 pm
Re: OFFICIAL - New KCI Terminal
Or save them for any future expansions the terminal might get
- Cratedigger
- Penntower
- Posts: 2168
- Joined: Thu Dec 02, 2021 3:32 pm
Re: OFFICIAL - New KCI Terminal
I think the plan is to try to save all the medallions they can from all terminals. There just isn’t any plan yet for the medallions from B and C
https://www.kcur.org/arts-life/2019-03 ... oject-ever
https://www.kcur.org/arts-life/2019-03 ... oject-ever
Airport planners have already removed the hanging installations and intend to save and reuse as many of the 39 medallions in Terminal A's terrazzo floor as they're able. They'll do the same for terminals B and C, but Bosch says he doesn't have a timeline for those.
- KCPowercat
- Ambassador
- Posts: 34618
- Joined: Mon Oct 07, 2002 12:49 pm
- Location: Quality Hill
- Contact:
Re: OFFICIAL - New KCI Terminal
It's fun and all but the less I remember of the current terminals the better.
I'm ready for a fun 11 months of seeing the finishing touches coming together.
I'm ready for a fun 11 months of seeing the finishing touches coming together.
- Anthony_Hugo98
- Penntower
- Posts: 2230
- Joined: Fri Mar 22, 2019 10:50 pm
- Location: Overland Park, KS
Re: OFFICIAL - New KCI Terminal
First of the new Jetway/JetBridge deliveries. Each bridge it seems requires two trucks, so this will likely be a lengthy delivery process. Link to video is below
https://youtu.be/paIwXmql9N0
https://youtu.be/paIwXmql9N0
- KCPowercat
- Ambassador
- Posts: 34618
- Joined: Mon Oct 07, 2002 12:49 pm
- Location: Quality Hill
- Contact:
- normalthings
- Mark Twain Tower
- Posts: 8018
- Joined: Mon Mar 30, 2015 9:52 pm
Re: OFFICIAL - New KCI Terminal
Boarding Bridges
-
- New York Life
- Posts: 328
- Joined: Thu Oct 19, 2006 5:22 pm
- Location: Shawnee
Re: OFFICIAL - New KCI Terminal
Nice. I'm glad we sprung for those instead of the windowless ones made of corrugated steel, fluorescent lighting, and despair.
-
- Parking Garage
- Posts: 36
- Joined: Tue Feb 10, 2015 9:38 pm
- Location: Peoria, AZ
Re: OFFICIAL - New KCI Terminal
I was under the impression that there was some rule or regulation that in the US the jetbridges had to be made of corrugated steel, fluorescent lighting, and despair. The new jetbridges at Phoenix Sky Harbor all are of the windowless design.
- Anthony_Hugo98
- Penntower
- Posts: 2230
- Joined: Fri Mar 22, 2019 10:50 pm
- Location: Overland Park, KS
Re: OFFICIAL - New KCI Terminal
The FAA originally did have some type of rule or regulation stating they had to be made of a solid material, I’m unsure if the airport had to get a clearance from them, or if that rule has simply faded away. I know the extension to the Killeen regional airport down in Ft. Hood, TX used glass jetways as well. Haven’t seen them elsewhere in the U.S. yet
- KCPowercat
- Ambassador
- Posts: 34618
- Joined: Mon Oct 07, 2002 12:49 pm
- Location: Quality Hill
- Contact:
Re: OFFICIAL - New KCI Terminal
They tweeted out a couple years ago these didn't cost anymore
- normalthings
- Mark Twain Tower
- Posts: 8018
- Joined: Mon Mar 30, 2015 9:52 pm
Re: OFFICIAL - New KCI Terminal
I think its a construction and buildings code rule that was changed, not FAAAnthony_Hugo98 wrote: ↑Tue Apr 12, 2022 5:58 pmThe FAA originally did have some type of rule or regulation stating they had to be made of a solid material, I’m unsure if the airport had to get a clearance from them, or if that rule has simply faded away. I know the extension to the Killeen regional airport down in Ft. Hood, TX used glass jetways as well. Haven’t seen them elsewhere in the U.S. yet
-
- New York Life
- Posts: 328
- Joined: Thu Oct 19, 2006 5:22 pm
- Location: Shawnee
Re: OFFICIAL - New KCI Terminal
I looked into this once. There was a regulation that functionally prohibited them (quoting from a 15-year-old thread on airliners.net):Anthony_Hugo98 wrote: ↑Tue Apr 12, 2022 5:58 pmThe FAA originally did have some type of rule or regulation stating they had to be made of a solid material, I’m unsure if the airport had to get a clearance from them, or if that rule has simply faded away. I know the extension to the Killeen regional airport down in Ft. Hood, TX used glass jetways as well. Haven’t seen them elsewhere in the U.S. yet
In 2014, NFPA had Hughes Associates put together an Aircraft Loading Walkways Literature and Information Review, which basically said, "lots of airports around the world have been using glass jetbridges for decades without issue, and people getting off of smaller planes often get dumped straight on the ramp anyway, so the concern that people will panic because they can see a fire through a glass jetbridge is kinda silly."The reason is due to NFPA 415, Airport Terminal Buildings, Fueling Ramp Drainage, and Loading Walkways which prohibits glass except for a window in the ramp access door and a window in the cab to move the jetty. This is because jetties are used as an evacuation route. From the NFPA themselves:
“The Committee’s intent of paragraph 6.2.4 has always been to restrict the use of glass and transparent or translucent materials in the passenger loading walkways to the minimum required for safe operation of the walkway. One of the main concerns is the psychological impact of people being able to see the flames and smoke, potentially negatively impacting the evacuation of the aircraft.”
I couldn't determine at what point NFPA decided to modify 415 in such a way as to allow glass jetbridges, and I'm not spending $58.50 to download it, but I'm guessing they made clear in the 2016 edition that it is possible for glass jetbridges to meet NFPA 415 requirements.
- KCPowercat
- Ambassador
- Posts: 34618
- Joined: Mon Oct 07, 2002 12:49 pm
- Location: Quality Hill
- Contact:
Re: OFFICIAL - New KCI Terminal
Pic gives good idea of width. From this I could see kiosks or s small bar in the middle and still space on both sides to pass for the amount of foot traffic we would typically see
https://twitter.com/KCIAirport/status/1 ... iRsWA&s=19
https://twitter.com/KCIAirport/status/1 ... iRsWA&s=19
- normalthings
- Mark Twain Tower
- Posts: 8018
- Joined: Mon Mar 30, 2015 9:52 pm
Re: OFFICIAL - New KCI Terminal
Great to meet @SouthwestAir President Mike Van de Ven earlier today in Kansas City. His first two words when he saw his airline’s gate space in the new terminal? “Wow. Wow!”
#BuildKCI
https://twitter.com/JustinMeyerKC/statu ... QyfkGTovpQ
- AllThingsKC
- Mark Twain Tower
- Posts: 9386
- Joined: Tue Aug 17, 2004 10:57 am
- Location: Kansas City, Missouri (Downtown)
- Contact:
- KCPowercat
- Ambassador
- Posts: 34618
- Joined: Mon Oct 07, 2002 12:49 pm
- Location: Quality Hill
- Contact:
Re: OFFICIAL - New KCI Terminal
Needs furniture. It's like an empty room in a house
I'm pretty pleased after seeing the people side by side.
I'm pretty pleased after seeing the people side by side.
- AlkaliAxel
- Broadway Square
- Posts: 2948
- Joined: Wed Jun 16, 2021 9:58 pm
- Location: West Plaza
Re: OFFICIAL - New KCI Terminal
That's a perfect analogy actually lol. Everyone thinks the bedroom is too small until you move the furniture in thereKCPowercat wrote: ↑Wed Apr 13, 2022 3:42 pm Needs furniture. It's like an empty room in a house
I'm pretty pleased after seeing the people side by side.
- AllThingsKC
- Mark Twain Tower
- Posts: 9386
- Joined: Tue Aug 17, 2004 10:57 am
- Location: Kansas City, Missouri (Downtown)
- Contact:
Re: OFFICIAL - New KCI Terminal
Don't rooms typically look larger without furniture?
I would think adding the chairs/counters/signs/etc would make the terminal look even more narrow.
Right now, it reminds me of Salt Lake City's airport, which I remember being adequate yet narrow.
But I don't work construction, so maybe all the pieces are needed to really make it come together.
I would think adding the chairs/counters/signs/etc would make the terminal look even more narrow.
Right now, it reminds me of Salt Lake City's airport, which I remember being adequate yet narrow.
But I don't work construction, so maybe all the pieces are needed to really make it come together.
KC is the way to be!